Stability, survival, patient satisfaction, and cost-minimization of CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 2-year follow-up of a two-centre randomized controlled trial.

BACKGROUND: CAD/CAM (computer-aided design/computer-aided manufacturing) fixed retainers (FRs) as an alternative to multistranded FRs to maintain orthodontic treatment outcome. OBJECTIVES: The primary aim was to compare CAD/CAM versus conventional multistranded FRs in terms of stability until 2 years. Secondary outcomes were failure rates, patient satisfaction, and cost-minimization. TRIAL DESIGN: 2-arm parallel, two-centre randomized controlled trial. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in a 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. FRs were bonded at the end of treatment, and patients were recalled after 12 and 24 months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. Cost-minimization analysis was undertaken. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): 90 in CAD/CAM and 91 in conventional group. One hundred and fifty three patients attended T24 follow-up. There were no significant differences in LII and arch dimensions between groups for failure-free patients. Within 24 months, 34% maxillary CAD/CAM FRs and 38% maxillary conventional FRs failed, along with 42% mandibular CAD/CAM FRs and 40% mandibular conventional FRs, with no significant difference in survival between groups (hazard ratios conventional to CAD/CAM: maxillary arch: 1.20 [P = 0.46], mandibular arch: 0.98 [P = 0.94]). There were no significant differences in patient satisfaction between groups. No harms were observed. Cost-minimization analysis showed that CAD/CAM FRs were slightly cheaper than conventional FRs. CONCLUSIONS: There were no clinically significant differences in LII, arch widths, and lengths between CAD/CAM and conventional FRs after 24 months. There were no differences in failures and patient satisfaction between groups. CAD/CAM FRs were slightly cheaper than conventional FRs. TRIAL REGISTRATION: ClinicalTrials.gov NCT04389879.

Striving for Perfection: How Stable Is Orthodontic Treatment When Excellent Outcomes Are Achieved? A 9-Year Post-Treatment Retrospective Study.

(1) Aims: The main objective of this retrospective study was to assess the long-term stability of difficult orthodontic treatments treated to an excellent result and to correlate stability to possible prognostic factors. Secondary objectives were to observe the changes in retention protocol over time and to assess Oral Health-related Quality of Life (OHRQoL) after a long-term post-treatment follow-up. (2) Methods: Cases presented for final examination by orthodontic postgraduate students were retrospectively screened for eligibility. Eligible patients were recalled for a post-treatment recall appointment (T2), consisting of a clinical examination and intraoral scan, and were asked to complete the Oral Health Impact Profile-14 (OHIP-14-DK). Gender, age at treatment commencement (T0), treatment modality and duration, and retention protocol were extracted from the records. At T2, the duration of the retention period was recorded, and retainers in place were clinically compared to the original retention protocol. The following variables were assessed on the sets of models at T0, T1 (end of treatment), and T2: arch length and width, overjet and overbite, Dental Aesthetic Index (DAI), Peer Assessment Rating score (PAR), and Little's Irregularity Index (LII). Multiple regression models were conducted. (3) Results: Eighty-five subjects attended T2. The mean post-treatment follow-up was 9.4 years +/- 2.4. In the upper arch, at T1, 74 patients had a combination of fixed and removable retainers, while at T2, 55 had a fixed retainer only. In the lower arch, at T1, 67 patients had a fixed retainer only, with this number increasing to 76 at T2. From T0 to T1, the PAR score improved by 96.1%, with the improvement remaining at 77.5% at T2. The stability of lower inter-canine and upper inter-premolar widths was significantly correlated with the extent of changes during treatment. The presence of a lower fixed retainer at T2 and a low LII at T1 were prognostic factors for stability. The mean weighted total OHIP-14 score at T2 was very low (1.6 ± 2.4 points). (4) Conclusions: In a sample with an initial high-severity malocclusion and treated to an excellent outcome, long-term stability was very good. Good stability can be retained when a lower fixed retainer is present at T2 and when a low LII is achieved at T1.

Stability, survival, and patient satisfaction with CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 6-month follow-up of a two-centre randomized controlled clinical trial.

OBJECTIVES: The primary aim of this two-arm parallel two-centre randomized controlled trial was to compare computer-aided design and computer-aided manufacturing (CAD/CAM) versus conventional multistranded fixed retainers (FRs) in terms of stability over 6 months. Secondary outcomes were failure rates and patient satisfaction. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. Retainers were bonded at the end of orthodontic treatment (T0), and patients were recalled after 1 (T1), 3 (T3), and 6 (T6) months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): Ninety in the CAD/CAM group and 91 in the conventional group. Three subjects dropped out at baseline, as they did not attend any of the follow-up appointments.168 patients attended the T6 visit. There were no significant differences in arch dimensions between T0 and T6, whilst the LII was different only in the CAD/CAM group (mean difference: 0.2 mm; 95% confidence interval: 0.1 to 0.4; P < 0.001). Within 6 months, 39 upper retainers (19 out of 88 CAD/CAM and 20 out of 90 conventional retainers) and 52 lower retainers failed (26 out of 88 CAD/CAM and 26 out of 90 conventional retainers), with no significant difference between the survival of both types of retainers (hazard ratios conventional to CAD/CAM: upper arch: 0.99 [P =0.99], lower arch: 0.93 [P = 0.80]). There were no significant changes in patient satisfaction between the groups. No harms were observed. CONCLUSIONS: There were no clinically significant differences in LII, arch widths and lengths between CAD/CAM and conventional retainers after 6 months. There was no difference in failures and in patient satisfaction between both types of FRs. REGISTRATION: ClinicalTrials.gov NCT04389879.

Does quality of orthodontic treatment outcome influence post-treatment stability? A retrospective study investigating short-term stability 2 years after orthodontic treatment with fixed appliances and in the presence of fixed retainers.

OBJECTIVE: The present study aimed to evaluate stability 2 years after orthodontic treatment and to investigate the influence of various pre-treatment and post-treatment prognostic factors on stability. SETTING AND SAMPLE POPULATION: Consecutive patients treated with full fixed appliance and retained with fixed retainers were retrospectively assessed for eligibility. MATERIALS AND METHODS: Digital models were analysed at treatment start (T0), end of treatment (T1) and 2 years post-treatment (T2). The Peer Assessment Rating (PAR) index, Little's Irregularity Index (LII), arch width and length, overjet, overbite and presence of unexpected post-treatment changes were assessed. Multiple regression analyses were conducted to model the relationship of all outcomes with several prognostics simultaneously. RESULTS: The sample consisted of 287 subjects (mean treatment time: 25.1 months, standard deviation [SD] 7.5; mean post-treatment follow-up: 27.5 months, SD 6.1) with a mean weighted PAR score of 29.5 (SD 8.6) at T0, 1.8 (SD 2.9) at T1 and 3.2 (SD 3.6) at T2. At T1, 95% of the subjects had a perfect LII versus 86% at T2. An increased LII at T1 correlated with increased LII and PAR changes from T1 to T2. PAR at T1 as well as overjet at T0 was a significant prognostic factor for PAR at T2. At T2, five cases (1.7%) showed unexpected post-treatment changes related to fixed retainers. CONCLUSION: Short-term post-treatment stability with fixed retainers was very good. Prognostic factors for stability included LII and PAR at T1, suggesting that high-quality treatment outcome in the presence of fixed retainers may ensure post-treatment stability.

Malocclusion and oral health-related quality of life among young Danish adults. Is there a difference between subjects who received orthodontic treatment during adolescence and subjects without treatment need? A cross-sectional study.

OBJECTIVES: To evaluate and compare malocclusion traits and oral health-related quality of life (OHRQoL) between untreated young adults assessed to have no orthodontic treatment need during childhood, and young adults treated orthodontically during childhood. In addition, to investigate the relationship between malocclusion and OHRQoL. MATERIALS AND METHODS: One hundred undergraduate students were screened for eligibility. Subjects had intraoral scans and completed OHIP-14 questionnaires. Angle molar relationship, overjet, overbite, arch length and width, Little's Irregularity Index (LII), Peer Assessment Rating (PAR) index and Dental Aesthetic Index (DAI) scores were assessed. Unpaired t-tests were used to compare outcomes between treated and untreated subjects. Multiple regression analyses were conducted to model the relationship between OHIP-14 and several prognostics simultaneously. RESULTS: Ninety-six subjects were included (mean age ± SD = 23.7 ± 1.8 years): 41 treated and 55 untreated. The untreated subjects had significantly higher LII (p = .02), PAR (p = .01), DAI (p < .01) and overbite (p = .03). The treated subjects had significantly larger inter-canine and inter-premolar distances. No relationship was found between OHIP-14 and LII, PAR, DAI, age, gender and presence/absence of previous orthodontic treatment. However, the DAI score was significantly correlated with the OHIP-14 functional limitation domain. CONCLUSIONS: Untreated subjects had significantly higher LII, PAR and DAI scores than the treated subjects. DAI score was significantly correlated with the OHIP-14 functional limitation domain.

Validity and Reproducibility of the Peer Assessment Rating Index Scored on Digital Models Using a Software Compared with Traditional Manual Scoring.

The aim of this study was to assess the validity and reproducibility of digital scoring of the Peer Assessment Rating (PAR) index and its components using a software, compared with conventional manual scoring on printed model equivalents. The PAR index was scored on 15 cases at pre- and post-treatment stages by two operators using two methods: first, digitally, on direct digital models using Ortho Analyzer software; and second, manually, on printed model equivalents using a digital caliper. All measurements were repeated at a one-week interval. Paired sample t-tests were used to compare PAR scores and its components between both methods and raters. Intra-class correlation coefficients (ICC) were used to compute intra- and inter-rater reproducibility. The error of the method was calculated. The agreement between both methods was analyzed using Bland-Altman plots. There were no significant differences in the mean PAR scores between both methods and both raters. ICC for intra- and inter-rater reproducibility was excellent (≥0.95). All error-of-the-method values were smaller than the associated minimum standard deviation. Bland-Altman plots confirmed the validity of the measurements. PAR scoring on digital models showed excellent validity and reproducibility compared with manual scoring on printed model equivalents by means of a digital caliper.

A Danish version of the oral health impact profile-14 (OHIP-14): translation and cross-cultural adaptation.

BACKGROUND: The Oral Health Impact Profile-14 (OHIP-14) questionnaire assesses quality of life related to people's perception of oral disorders on their well-being. However, a translated and validated Danish version of OHIP-14 is not yet available. The purpose of this pilot study was to translate and cross-culturally adapt the English version of the OHIP-14 into Danish (OHIP-14-DK). In addition, to assess its content and face validity, internal consistency and test-retest reliability. METHODS: The English version of OHIP-14 was translated into Danish following a standard protocol of cross-cultural adaptation. Stages I-IV: translation phase to generate a pre-final version "OHIP-14-DK". Stage V: pre-testing phase. A random sample of 22 orthodontic patients (mean age 24.7 years, SD ±14.8; 14 females, 8 males) were selected at the Section of Orthodontics, Aarhus University, Denmark. All patients self-completed the OHIP-14-DK and were then interviewed to assess its content and face validity. Internal consistency was assessed with Cronbach's alpha coefficients. All patients completed the same questionnaire again at a one-week interval. Test-retest reliability was assessed using Spearman's correlation coefficient and intra-class correlation coefficient (ICC). RESULTS: The initial and back translations were very similar: the OHIP-14-DK proved to have a good level of equivalence with no translation errors or deviations. Furthermore, the OHIP-14-DK seemed well-adapted to Danish culture and was understood by individuals down to 12 years of age. Pre-testing demonstrated good face and content validity; interviews had a response rate of 100% and confirmed that each item was understandable without inducing reluctance or hesitation. Thus, responses were related to their corresponding item. Therefore, no final adjustments were required for the pre-tested version. Cronbach's alpha for the OHIP-14-DK subscales fell in the 0.75-0.84 range, indicating an adequate-to-good internal consistency. Spearman's correlation coefficient for the OHIP-14-DK total score was 0.77. The ICC for the OHIP-14-DK total score was 0.91. CONCLUSIONS: The OHIP-14-DK seems well adapted to Danish culture, proved to be face and content valid and also showed good internal consistency and excellent reliability. However, its psychometric properties still need to be tested. STUDY REGISTRATION: Not applicable.

Diagnosis and Management of Hidden Caries in a Primary Molar Tooth.

Hidden caries is a dentinal lesion beneath the dentinoenamel junction, visible on radiographs. A single report described this lesion in primary dentition. This case report describes a case of hidden caries in a mandibular second primary molar, misdiagnosed as malignant swelling. A 3-year-old white girl was referred to the Department of Pediatric Dentistry with a chief complaint of pain and extraoral swelling on the right side of the mandible for the last 3 months. She was earlier referred to the surgical department for biopsy of the lesion. Radiographic and computed tomography scan examination showed a periapical lesion with buccal plate resorption and radiolucency beneath the enamel on the mesial part of tooth 85. The tooth was extracted, and follow-up of 2 years showed normal development of tooth 45. The main problem is early detection and treatment, since the outer surface of enamel may appear intact on tactile examination. HOW TO CITE THIS ARTICLE: Gera A, Zilberman U. Diagnosis and Management of Hidden Caries in a Primary Molar Tooth. Int J Clin Pediatr Dent 2017;10(1):99-102.